
Chairmen: Krzysztof Bobrowski (INCT) and Jerzy Lech Gębicki (IARC).
This Blog publishes current developments of the sub-picosecond pulsed, 4.5-MeV electron accelerator, which is part of the Ultrafast Pulsed Irradiation Facility, of the section Opto-electronic Materials of the DelftChemTech department of the Delft University of Technology.

Upper: PLL Synchronizer, Lower: MAL RF Amplifier | N-type Coax cable connected to RF input of Klystron Tube. |
Bi-directional coupler in waveguide section. RF diode detectors connected to forward and backward outputs. | Trigger signal generation and signal analyzing in control room. |
Control computer in control room. | Red warning light indicates accelerator operation. |
(a) Stainless Steel container with flange on one side and RF input coupler (copper) on the other side. The flange will host cooling water feedthroughs and vacuum pump connector. | (b) The RF waveguide (black) is connected to the RF input coupler. Between a RF window is placed to isolate the vacuum side (10-9 mbar) from the pressure side (2 bar SF6). |
(c) This is the side on with the electron beam line will be constructed. |